Hycrete MC1000+


Migrating Dual-Action Corrosion Inhibitor & Waterproofing Admixture

Hycrete MC1000+ is a patented dualaction migrating corrosion-inhibiting and waterproofing concrete admixture that delivers industry leading performance. Hycrete MC1000+ protects concrete and steel in two ways:

a) Migrates to form a protective passivating layer on the surface of reinforcement steel that dramatically reduces corrosion initiation and propagation. Protects reinforcement even in cracked concrete

b) Keeps water and corrosive agents out of concrete by reducing absorption to an industry low compared to control concrete.

Hycrete MC1000+ admixture in concrete provides an effective, robust and permanent barrier against water and chloride ingress that does not degrade and never requires reapplication. Concrete treated with Hycrete MC1000+ outperforms all single action inhibitors and High Performance Concrete (HPC) mixes that include silica fume, fly ash, slag and calcium nitrite.

Hycrete, Corrosion inhibiting



  • Bridges and highway infrastructure
  • Dams, reservoirs, and water and wastewater systems
  • Ports & marine structures
  • Pilings
  • Tunnels
  • Airport runways
  • Rail & metro systems
  • Power & telecom infrastructure
  • Parking structures


  • Dual-action high performance – Migrating corrosion inhibitor and waterproofer. Provides both anodic and cathodic protection.
  • Hycrete MC1000+ significantly improves the durability of concrete
  • Industry leading performance level of up to 7 times reduction in water absorption
  • Migrates to form protective coating around steel reinforcement
  • Enhanced healing of cracks up to 0.4mm
  • Increases electrical resistivity of concrete
  • Liquid form means more consistent performance and verifiable dosage
  • Neutral concrete set time performance
  • Easy to use, no workability issues



  • NSF/ANSI 61 - approved for use in potable water tanks
  • Compatible with standard admixture metering equipment
  • Cradle to Cradle™ certified by MBDC
  • Non-toxic, no VOCs


Hycrete MC1000+ is a water-based material and should not be swallowed or come into contact with skin or eyes. Wear suitable protective gloves and goggles. If material comes in contact with the skin, wash immediately with soap and water. In case of contact with eyes, rinse immediately with sufficient water and seek medical support. If swallowed, seek immediate medical attention. For further information please consult the Material Safety Data Sheet.